| Name: |
26 inch iIndustrial spray fan |
| Motor: |
220V/50HZ, motor, copper wire, 120*102*18 130W three-speed speed regulation, stretched casing, ball bearing, aluminum tooth box, large connector |
| Power Cord: |
European-style two-round plug, 3*0.75*2.1m (copper wire) |
| Speed: |
1350, temperature rise below 75K including temperature control, |
| Grill: |
1.8 Self buckling mesh grill (dust spraying), |
| Blade: |
2 scimitar leaves 430g |
| Pole: |
1.3M lifting pole |
| Bottom plate: |
7KG plastic cross base |
| Packing Size: |
72*18*72cm 1 Set With A 5Ply Color Box |
Factory Introduction:
Manufacturing process:
Our fans use advanced manufacturing techniques and exquisite craftsmanship to ensure that every detail reaches the highest standards.
We have introduced advanced automation equipment and strict quality control processes to ensure that every fan we produce is synonymous with high quality.
Professional Team:
With extensive R&D and production expertise in scientific research, our engineers are seasoned professionals constantly pushing the envelope of technological innovation.
They are dedicated to designing products that are both practical and revolutionary, fulfilling the high standards required for top-quality fans.
Customization Capabilities:
As a seasoned manufacturer, we take immense pride in our flexibility and customization prowess, tailoring fans to various specifications
and functionalities based on customer requirements, thus catering to an array of application scenarios.
Supply Chain Advantages:
We have built an efficient supply chain system and collaborate with trustworthy raw material suppliers.
This enables us to ensure the superior quality of raw materials while maintaining production efficiency, delivering consistently reliable products to our customers.
Quality Assurance:
Every fan undergoes rigorous quality inspections and conforms to ISO and other international standards.
We are so confident in the excellence of our products that we offer a long-term quality guarantee, providing our customers with peace of mind and security.
Green Production:
Our commitment to green production involves using eco-friendly materials and energy-efficient technologies to minimize environmental impact.
Our production process adheres to international environmental protection standards, offering customers healthier and more eco-conscious product choices.
Customer Service:
Our dedicated customer service team is here to support you. From efficient product consultations and after-sales service to customization requests,
we are committed to providing you with satisfying answers and solutions with utmost professionalism.
Choose us, and you choose quality and trust.
FAQ:
Question 1: How can I get the price?
A: We typically provide a quote within 24 hours of receiving your inquiry. If you need an urgent response,
please email us or contact us through other channels so we can expedite your quote.
Question 2: Can I buy samples before placing orders?
A: Yes, please feel free to contact us.
Question 3: What is your lead time?
A: It depends on the order quantity and the season when you place the order. Generally, we can ship within 7-15 days for small quantities and about 30 days for larger quantities.
Question 4: What are your payment terms?
A: We accept T/T, Western Union, L/C, and Paypal. These terms are negotiable.
Question 5: What is the shipping method?
A: We can ship by sea, air, or express (EMS, UPS, DHL, ***, FEDEX, etc.). Please confirm with us beforehand.
Fan Installation and Maintenance Guide
1. Unpacking:
Carefully unpack and ensure all components are present.
Verify that no part of the fan is damaged.
2. Assembly:
Attach the base to the stand as per the provided instructions.
Securely install the fan blades onto the motor unit.
Ensure all screws are securely fastened using the provided tools.
3. Placement:
Select a flat and stable surface to position the fan.
Position the fan at least 2 feet away from walls or large furniture to maximize air circulation.
4. Power connection:
Connect the fan to a grounded electrical outlet.
Inspect the power cord thoroughly for any signs of damage before use.
5. Remote control settings:
Insert the batteries into the remote control, ensuring the polarity markings are followed.
Aim the remote at the fan and test various functions to confirm proper operation.
MAINTENANCE INSTRUCTIONS
This fan requires minimal maintenance. Do not attempt repairs yourself; refer to qualified service personnel if needed.
1. Before cleaning or assembling, ensure the fan is unplugged.
2. Keep the motor vents free from dust and fluff for adequate air circulation. Use a vacuum cleaner to clean the vents only when unplugged. Do not disassemble the fan to remove fluff.
3. Clean the exterior with a soft cloth soaked in mild detergent. Avoid using abrasive cleaners or solvents to prevent surface damage.
4. Prevent water or other liquids from entering the motor housing or internal parts.
5. If the power cord is damaged, it is highly recommended to seek professional repair.
Our Services
Unmatched quality through meticulous attention to detail.
1* Our factory employs automated production lines, ensuring motors are reliable and of high quality.
2* Low heat emission during operation, silent performance even under long-term overload, and rust prevention.
3* Compact and elegant design, easy to carry.
4* Powerful wind, robust motor, faster speeds, and three natural wind speed settings.
5* Smart safety features including a safety switch and over-temperature protection for enhanced security.
6* Low power consumption and environmentally friendly.
Troubleshooting:
1. The fan does not work:
Verify the power supply and ensure the outlet is functional.
Check if the remote control batteries are functioning properly.
If the issue persists, please contact our support team.
2. Abnormal noise:
Inspect the fan for any loose parts or foreign objects.
Lubricate the motor if needed.
3. Remote control failure:
Replace the remote control batteries.
Ensure there are no obstructions between the remote control and the fan.
Following these installation, maintenance, and troubleshooting guidelines will ensure optimal performance and longevity of your fan.
For ongoing issues, please contact our support team for further assistance.
Our Product:
Our Workshop
Manufacturing process:
Our fans utilize advanced manufacturing techniques and superior craftsmanship to meet the highest standards of quality.
We employ sophisticated automation equipment and stringent quality control procedures to guarantee every fan embodies excellence.
Professional Team:
With a highly skilled R&D and production team in scientific research, our engineers possess extensive experience and an unwavering drive for technological innovation.
They are dedicated to creating products that seamlessly blend practicality with cutting-edge design, ensuring that every fan meets the highest standards of quality and performance.
Customization Capabilities:
As a seasoned manufacturer, we take pride in our adaptability and bespoke customization services, allowing us to tailor fans to various specifications
and functionalities according to customer requirements, catering to a wide array of application scenarios.
Supply Chain Advantages:
We have cultivated an efficient supply chain system, collaborating with dependable raw material suppliers.
This synergy enables us to maintain superior quality in raw materials while ensuring high production efficiency, delivering consistently stable and reliable products to our customers.
Quality Assurance:
We implement rigorous quality inspections for each Taiwanese fan, meeting ISO and other international standards.
Our confidence in our product quality is reflected in our long-term quality guarantee, providing our customers with exceptional peace of mind and security.
Green Production:
We are devoted to green production practices, employing eco-friendly materials and energy-efficient technologies to minimize environmental impact.
Our production processes adhere to global environmental protection standards, offering customers healthier and more sustainable product choices.
Customer Service:
Our dedicated customer service team is available to assist you. From efficient product consultations to comprehensive after-sales support and customized solutions,
we are committed to providing you with prompt and professional assistance.
Choose us for unparalleled quality and trust.
FAQ:
Question1: How can I get the price?
A: We typically respond with a quote within 24 hours of receiving your inquiry. If you're in a hurry to get the price,
please email us or contact us through other channels to expedite your quote.
Question2: Can I buy samples when placing orders?
A: Yes, absolutely. Please feel free to contact us.
Question3: What is your lead time?
A: It depends on the order quantity and the season. Generally, we can ship within 7-15 days for small quantities, and around 30 days for larger quantities.
Question4: What is your payment term?
A: We accept T/T, Western Union, L/C, and PayPal. These terms are negotiable.
Question5: What is the shipping method?
A: We offer shipping by sea, air, or express services (EMS, UPS, DHL, ***, FEDEX, etc.). Please confirm the method with us beforehand.
Leave your messages to book factory site visits!
We warmly welcome you and look forward to being your business partner!
Together, let's create a win-win situation!
Audited Supplier 
){kind=link}
){kind=link}